欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
REXROTH PST6250.333l控制模块如何使用

主页 > 产品中心 > 力士乐

REXROTH PST6250.333l控制模块如何使用

类目:力士乐
型号:PST6250.333l
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情
主营DCS控制系统备件,PLC系统备件及机器人系统备件,
优势品牌:Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件

REXROTH PST6250.333l控制模块如何使用 REXROTH PST6250.333l控制模块如何使用 REXROTH PST6250.333l控制模块如何使用 REXROTH PST6250.333l控制模块如何使用
用变频调速来实现恒压供水,与用调节阀门来实现恒压供水相比,节能效果十分显著(可根据具体情况计算出来)。
其优点是:
1、起动平衡,起动电流可限制在额定电流以内,从而避免了起动时对电网的冲击;
2、由于泵的平均转速降低了,从而可延长泵和阀门等的使用寿命;
3、可以消除起动和停机时的水锤效应。
一般地说,当由一台变频器控制一台电动机时,只需使变频器的配用电动机容量与实际电动机容量相符即可。当一台变频器同时控制两台电动机时,原则上变频器的配用电动机容量应等于两台电动机的容量之和。但如在高峰负载时的用水量比两台水泵全速供水量相差很多时,可考虑适当减小变频器的容量,但应注意留有足够的容量。
虽然水泵在低速运行时,电动机的工作电流较小。但是,当用户的用水量变化频繁时,电动机将处于频繁的升、降速状态,而升、降速的电流可略超过电动机的额定电流,导致电动机过热。因此,电动机的热保护是必需的。对于这种由于频繁地升、降速而积累起来的温升,变频器内的电子热保护功能是难以起到保护作用的,所以应采用热继电器来进行电动机的热保护。
在主要功能预置方面,高频率应以电动机的额定频率为变频器的高工作频率。升、降速时间在采用变频器内置PID调节。升、降速时间应尽量设定得短一些,以免影响由PID调节器决定的动态响应过程。控制原理如下:

三、变频器控制特点
1、节电
优化的节能控制软件,使水泵实现大限度地节能运行。
2、节水
根据实际用水情况设定管网压力,自动控制水泵出水量,减少了水的跑、漏现象。of each "not disappeared" alarm, the occurrence time and disappearance time of each "disappeared" alarm, the confirmation time of each "confirmed" alarm and the user. When the alarm appears, the alarm printer will immediately print the alarm information. ? operation record refersto the major situations of the system (such as equipment failure, limit exceeding alarm, start and stop of large equipment, etc.) or the adjustment of equipment operation and parameters by operators. These situations and operation processes can be recorded through the event recording function as the basic data for accident analysis in the future. The content of event record includes various event information, the user when the event occurs, the time when the event occurs, etc. ? report printing: the system automatically records various process operation data and summarizes all data to form a report. The report can be printed regularly or called for printing. The operator can also enter the report screen through the menu or button to view the historical report.

The automatically generated production report (shift / day / month) is used