欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
170ANR12090库存可编程控制模块

主页 > 产品中心 > 140系列PLC

170ANR12090库存可编程控制模块

类目:140系列PLC
型号:170ANR12090
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情

170ANR12090库存可编程控制模块 170ANR12090库存可编程控制模块 170ANR12090库存可编程控制模块
瑞昌明盛进出口贸易有限公司
主营DCS控制系统备件,PLC系统备件及机器人系统备件,
优势品牌:Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
170ANR12090库存可编程控制模块 170ANR12090库存可编程控制模块 170ANR12090库存可编程控制模块
PM-160在该应用中的通讯原理及参数配置
1. PM-160参数配置介绍
由于该现场电子天平通讯协议不符合Modbus规约,所以采用了PM-160的通用模式进行通讯。该模式的配置界面如图三所示:

图三:PM-160通用模式配置界面
上图中,协议类型选择为“通用模式”,串口参数包括波特率、校验位、数据位、停止位等跟电子称的RS232串口设置保持一致,断帧方式选择为“字符超时”,通讯接口选择为“RS232”。
2.PM-160通用模式工作原理介绍
PM-160在通用模式下实现PROFIBUS与RS232之间的数据交换,PROFIBUS-DP与RS232之间的数据交换是双向传输的。PROFIBUS输出数据通过RS232口发送给对应的电子天平称,同时接收该称返回的响应,并且存放到PROFIBUS的数据输入区。数据交换格式如图四所示:
Eo是PROFIBUS输出数据的事务号,该字节由PM-160定义,PM-160会通过对比该字节是否发生变化来决定是否通过RS232口给串口设备发送数据;i是输出数据个数,该字节也由PM-160定义,PM-160会通过判别该字节来决定通过RS232口给串口设备发送数据的字节个数;D1-Di是PM-160通过RS232口发送的数据。
Ei是PROFIBUS输入数据的事务号,该字节由PM-160定义,PM-160的RS232口每接收到一帧新的数据,该字节就会加1;j是输入数据个数,该字节也由PM-160定义,表示PM-160的RS232口接收到的串口的数据字节长度(该字节是否显示出来可以通过配置软件设置);D1-Dj是PM-160的串口接收到的数据。

图四:PM-160通用模式数据交换格式
3.STEP7组态介绍
PM-160作为PROFIBUS从站,有其对应的GSD文件。在组态时,需要将GSD文件正确添加到PROFIBUS主站,对于PROFIBUS侧输入输出字节数的添加,满足实际需求即可。STEP7组态界面如图五所示:

图五:STEP7组态界面
4.现场通讯报文实例
PROFIBUS侧发送请求:
11 04 53 55 0D 0A 【HEX】
SU【ASCII】----------which not only ensures work safety, but also facilitates the observation of the real-time operation of the equipment. If the safety door is suddenly opened for some reason, the equipment will stop urgently. After the safety door is closed normally, press the reset button and the equipment will continue to work. After that, the solenoid valve is powered on and reversed, the glue spraying head is opened, and the molten glue is sprayed out under its own pressure. The control of glue spraying length is actually realized by controlling the motor to drive the glue spraying head to move along the set track. The continuous rotation of the motor and the synchronous glue spraying of the glue spraying head can obtain a glue strip of a specific length. By setting the glue spraying time in PLC, the glue amount can be adjusted arbitrarily within the required range. By controlling the glue spraying head to work intermittently, intermittent glue segments can be obtained on the side of the carton.