欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
TSX3721101机器人模块PLC系统

主页 > 产品中心 > 140系列PLC

TSX3721101机器人模块PLC系统

类目:140系列PLC
型号:TSX3721101
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情

TSX3721101机器人模块PLC系统 TSX3721101机器人模块PLC系统 TSX3721101机器人模块PLC系统
瑞昌明盛进出口贸易有限公司
主营DCS控制系统备件,PLC系统备件及机器人系统备件,
优势品牌:Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
TSX3721101机器人模块PLC系统 TSX3721101机器人模块PLC系统 TSX3721101机器人模块PLC系统
BCNet-S7一端为D9接口,直接插到西门子PLC的PPI、MPI或者PROFIBUS口上,另一端为RJ45接口,直接连接到PC机或者交换机,可以实现单个控制系统上位监控,也可以实现多个控制系统联网。扩展的S7总线接口还可以用于连接编程电缆等别的设备。
2、UniMAT PLC是国产PLC中的品牌,完全兼容西门子的S7-200和S7-300系列,可和西门子任意搭配使用或完全使用UniMAT PLC中的UN200和UN300系列。
四. 联网通讯方案
将BCNet-S7网关插入到UN200或者UN300的RS485口上,然后通过以太网线连接到以太网交换机上,再通过以太网线把交换接连接到HMI和计算机上,即可实现如下功能:
1、BCNet-S7MPI/PPI支持UniMAT PLC(UN-200,UN-300)以太网通讯;
2、支持多主站通讯,BCNet模块可以和触摸屏等设备共用一个通讯端口;
3、支持WINCC直接连接UN200,无需OPC。
其中的通讯方式有:
1、模块兼容西门子的以太网驱动,上位组态软件里可以直接调用;
2、支持通用的ModbusTCP协议,将PLC的内部地址和modbus地址直接对应,PLC
内不需要编程;
3、提供免费的OPC,无连接数和变量数限制,适合大规划的设备联网。
五. 参数配置及驱动使用
1、驱动安装
安装好BCNetS7驱动,在PG/PC的接口中会出现三个驱动选项:
BCNet-S7(MPI),用于UN300的MPI口通讯;
BCNet-S7(PPI),用于UN200的PPI口通讯;
BCNet-S7(DP),用于UN300的DP口通讯;
注:驱动可以支持windows2000,xp,Win7(64位)。around it. These alternating magnetic fields can produce interference through coupling on the signal cable or high-frequency interference through coupling on the power source cable. If these interference exceed the allowable range, it will also affect the work of the system.

(4) Other factors

Lightning strike may cause great electromagnetic interference around the system, or it may introduce interference through various grounding wires. Static electricity also often becomes the killer of destroying system equipment.

From the above, we can conclude that the interference current (voltage) generated by various interference sources (noise sources) on the measuring device and detection system needs to have three elements at the same time: ⑴ interference source; (2) route of transmission; (3) receiver.

3 general anti-interference technology

It is known that the device control system needs to meet the "three elements" at the same time to be disturbed.