欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
AS-BDAP-211模拟量输入通道

主页 > 产品中心 > 140系列PLC

AS-BDAP-211模拟量输入通道

类目:140系列PLC
型号:AS-BDAP-211
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情

AS-BDAP-211模拟量输入通道 AS-BDAP-211模拟量输入通道 AS-BDAP-211模拟量输入通道
瑞昌明盛进出口贸易有限公司
主营DCS控制系统备件,PLC系统备件及机器人系统备件,
优势品牌:Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
AS-BDAP-211模拟量输入通道 AS-BDAP-211模拟量输入通道 AS-BDAP-211模拟量输入通道
由于我们的设备是处于工业现场中,在现场有各种各样的电场和磁场,这些电场、磁场无不影响着控制系统。电磁场(EMI)主要由电力网络、电气设备的暂态过程、雷电、无线电广播、电视、雷达、高频感应加热设备等产生的;屏蔽效果差的PLC控制系统本身也会产生电磁场,所产生的电磁场反过来又影响控制系统本身。这些电磁场统称为辐射干扰,其分布极为复杂。只要PLC控制系统处于辐射范围内,其就会受到干扰。控制系统受到干扰的程度和辐射的强弱和频率有关。辐射通过以下两种途径影响PLC控制系统: ①直接对PLC内部的辐射,由电路感应产生干扰; ②对PLC通信网络的辐射,由通信线路的感应引入干扰。针对此种干扰,屏蔽、滤波和接地是三种主要的方法。后来给PLC接了地,但效果并不理想。
(3) 由脉冲信号线引入的干扰
在现场测试中发现对脉冲信号线的干扰是导致PLC丢失的主要原因,观察后发现这个脉冲线存在很多问题:
<!--[if !supportLists]-->a)              <!--[endif]-->脉冲线太长,中间经过端子转接,转接这一段用的是普通单芯线,根本没有用蔽线;
<!--[if !supportLists]-->b)              <!--[endif]-->脉冲这两条线应该是用双绞带屏蔽的电缆,但实际没有用;
<!--[if !supportLists]-->c)               <!--[endif]-->脉冲线我强电电路交叉布线;
<!--[if !supportLists]-->d)              <!--[endif]-->伺服近控制电源是采用开关电源上的24V电源增加了干扰
针对这些问题,把伺服的脉冲线改为屏蔽双绞,且中间没有转接,和动力线分开布线,用PLC的24V电源给伺服脉冲接收端单独提供电源,效果改善明显,但是也没有完全解决。
(4) 由地线引入的干扰。
接地的目的有两个:一是为了安全;二是为了抑制干扰地线的连接方式不当,会引起地环流。地环流在屏蔽线内部产生电磁场,进而干扰屏蔽线,造成信号的失真。下图为正确的接地方式,坚决避免串联接地。
2.2 伺服
松下A5伺服系统和PLC系统类似,PLC的外部干扰源和抗干扰措施同样适用于伺服系统。transient impact of the power grid, etc. are all connected to the power supply side through the transmission line. PLC power supply usually adopts isolated power supply, but its isolation is not ideal due to its mechanism and manufacturing process factors. In fact, due to the existence of distributed parameters, especially distributed capacitance, absolute isolation is impossible.

(4) interference from signal line

All kinds of signal transmission lines connected with PLC control system will always be invaded by external interference signals in addition to transmitting all kinds of effective signals. There are two main ways of this interference: one is the power grid interference connected in series through the power supply of transmitters or common signal instruments, which is often ignored; Second, the signal line is disturbed by the induction of space electromagnetic radiation, that is, the external induction interference on the signal line, which is very serious.