欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
AS-BADU-216模拟量输入通道

主页 > 产品中心 > 140系列PLC

AS-BADU-216模拟量输入通道

类目:140系列PLC
型号:AS-BADU-216
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情

AS-BADU-216模拟量输入通道 AS-BADU-216模拟量输入通道 AS-BADU-216模拟量输入通道
瑞昌明盛进出口贸易有限公司
主营DCS控制系统备件,PLC系统备件及机器人系统备件,
优势品牌:Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
AS-BADU-216模拟量输入通道 AS-BADU-216模拟量输入通道 AS-BADU-216模拟量输入通道
给设备的精度带来很大影响,本文就结合在现场调试过程中遇到的问题讨论一下如何解决干扰问题。
二、控制系统中主要的干扰来源和抑制措施   在现场调试中,开始发现的是两个定位轴,反复按前进后退后不能返回到原来的位置,而另外三个轴就没有问题,仔细观察后发现,这两个轴的伺服是由PLC的脉冲口直接发脉冲的,另外的三个轴是由定位模块发脉冲的,后来发现控制传输梭的也是由PLC直接发脉冲的,监控伺服参数后,都存在丢失脉冲的问题,后来就从几个方面进行了分析,相应的采取了措施。
2.1 PLC
PLC控制系统的干扰分为两类:内部干扰、外部干扰。
内部干扰,是PLC本身的问题;
外部干扰,包括导线传入的干扰(由电源线、控制线各信号线等外部线引入的干扰) 、空间感应和辐射干扰、地线传入的干扰。
在现实的工业实际情况中,由于内部干扰的情况比较少见,所以先从外部干扰来解决。
(1)电源部分
在PLC控制系统中,电源占有极其重要的地位,也是干扰进入PLC的主要途径之一。在工厂的电网线路上挂接了各种用电设备,如大功率电动机、交直流传动装置、变频器、家用电器等等,这些设备的启、停会引起电网的电流电压波动,产生的幅值很大浪涌和高次谐波。FX3U是用的交流电源供电,在电柜的有两个变频器,在变频器的电源上都加了滤波器,应该在PLC的交流电源输入端加接带屏蔽层的隔离变压器和低通滤波器,屏蔽层应可靠接地;也可以在初级、次级绕组之间加屏蔽层,并将它们和铁芯一起接地,以提高高频共模干扰能力,但由于条件所限,这些工作都没有作。
(2) 来自空间感应和辐射的干扰 Generally, it is protected by setting shielded cables, PLC local shielding and high-voltage relief elements.

(2) Interference from external leads of the system

It is mainly introduced through power supply and signal line, which is usually called conducted interference. This kind of interference is more serious in industrial sites in China.

(3) Interference from power supply

Practice has proved that there are many PLC control system failures caused by the interference introduced by the power supply. The author encountered it in the commissioning of a project, and then replaced the PLC power supply with higher isolation performance.

The normal power supply of PLC system is powered by power grid. Due to the wide coverage of the power grid, it will be subject to all space electromagnetic interference and induce voltage and circuit on the line. In particular, changes in the power grid, switching surges, start and stop of large power equipment, harmonics caused by AC and DC rotating devices, short-circuit