欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
REXRTOH R911274894 MHD093C-058-PG0-BN自动化电机模块库存

主页 > 产品中心 > 力士乐

REXRTOH R911274894 MHD093C-058-PG0-BN自动化电机模块库存

类目:力士乐
型号:R911274894 MHD093C-058-PG0-BN
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情

REXRTOH  R911274894 MHD093C-058-PG0-BN自动化电机模块库存 REXRTOH  R911274894 MHD093C-058-PG0-BN自动化电机模块库存
瑞昌明盛进出口贸易有限公司
主营DCS控制系统备件,PLC系统备件及机器人系统备件,
优势品牌:Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
REXRTOH  R911274894 MHD093C-058-PG0-BN自动化电机模块库存 REXRTOH  R911274894 MHD093C-058-PG0-BN自动化电机模块库存 REXRTOH  R911274894 MHD093C-058-PG0-BN自动化电机模块库存

REXRTOH  R911274894 MHD093C-058-PG0-BN自动化电机模块库存
控制系统主要有三部分组成:控制器,触摸屏及变频器,在某设备自控系统的选型中,采用了西门子的小型自动化解决方案:S7-200 SMART,SMART LINE和V20变频器,主要基于以下因素:
八面转鼓式蛋托成型机是一种典型的纸托生产设备机型,从工艺上由配浆系统、成型系统、烘干系统和整形系统组成,各系统的具体构成如下:
配浆系统:22kw碎浆机两台,5.5kw供浆泵6台,4kw供水泵两台;
成型系统:六台半自动往复送料成型机,该成型机由气缸推动,配备S7-200 SMART PLC和SMART LINE触摸屏;
烘干系统:采用天然气为能源的55米烘干线。该设备由两台燃气式燃烧机,2台4kw抽湿风机,6台5.5kw循环风机,和7.5kw带变频驱动的链轮电机组成;整形系统:由八台5吨气液热压机组成。
西门子方案应用
配浆系统电箱主要控制部件配浆系统介绍:22kw碎浆机半个小时可以生产纸浆55kg。浆池分为浓浆池,配浆池,和供浆池。三个浆池容积都为12m3。
整套方案可以做到以下动作:自动提示加入制浆原材料,然后自动混加水,然后在设定好的时间内把原料碎成纸浆。自动把纸浆排放到相应的池子,并混水调节到需要的浓度。烘干系统主要控制部件该控制系统可以清楚的显示烘干线的工作状态,同时根据PLC的智能曲线控制,使温度和链轮运行速度,循环风机速度相应匹配,自动调节。另外加入了计数装置,可以计算烘干产品的数量。通过设定参数,还可以知道烘干的产品总重量。
中心控制电箱主要部件如图所示,通过传统的网线,把九个PLC同时连入交换机,中心工作台上面的10寸触摸屏作为监控和设置主机。
整套方案简洁明了,投入成本低,自动化,智能化得到大大的提升。
中心控制台的作用是监视整个工厂的生产状况,同时协调四个工艺的进行。控制上,通过对PLC进行编程fault, etc. the alarm information can be uploaded actively through GPRS module; The collected data such as flow and pressure can be used for alarm judgment in the data acquisition server. In addition to exceeding the alarm limit, it can also judge various states according to the parameter values, such as a series of alarm information such as valve opening, short circuit, overload, arrears and so on. Main anti-interference measures (1) reasonable treatment of power supply to suppress the interference introduced by power grid. For the power grid interference introduced by power supply, an isolation transformer with a transformation ratio of 1:1 with shielding layer can be installed to reduce the interference between equipment and ground. LC filter circuit can also be connected in series at the input end of power supply.

(2) Installation and wiring ● the power line, control line, PLC power line and I / O line shall be wired separately, and the isolation transformer shall be connected with PLC and I / O by