Radisys 61-0093-01调节器

产品详细资料
禁用除过频以外的所有保护功能。 验证设置是否符合使用中的要求。S4 ELEMENTS中修改了过频设置 频率 OVERFREQUENCY（频率过高）设置菜单。电压输入功能（启用电压输入）：使用连接到端子C11和C12的变频电压/电流源作为电压信号，连接到端子H1和G1作为电流信号， 将频率设置为60.00 Hz（或50.00 Hz），将电压幅度设置为额定VT二次电压。 将电流幅度设置为额定CT次级。 监测适当的跳闸和辅助继电器。 重置继电器上的所有警报和指示。745显示屏应保持不变，没有跳闸指示。 缓慢增加频率，直到输出继电器工作。 检查进行操作的频率是否为选定的频率设置。 随着频率的变化，验证A2 METERING 频率 SYSTEM FREQUENCY（系统频率）实际值表示系统频率的正确值。 慢慢降低电压。 注意输出继电器复位时的电压。 检查该压降是否等于S4元件 频率 过频 低工作电压电压水平。请注意，该电平可以设置为0.00 A，在这种情况下，元件保持工作在大约标称2%的电压电平。 缓慢增加电压，并在电压达到设定水平以上2%时检查元件是否工作。 将电压恢复到标称值。 慢慢减小电流，直到元件复位。 检查该漏电流电平是否等于S4元件 频率 过频 小工作电流设置。
Disable all protection functions except overfrequency.  Verify that settings match in-service requirements. Overfrequency settings are modified in the S4 ELEMENTS  FREQUENCY  OVERFREQUENCY settings menu. Voltage input function (voltage input enabled): Using the variable-frequency voltage/current source connected to terminals C11 and C12 for the voltage signal and H1 and G1 for the current signal,  Set the frequency to 60.00 Hz (or 50.00 Hz) and the voltage amplitude to the rated VT secondary voltage.  Set the current amplitude to rated CT secondary.  Monitor the appropriate trip and auxiliary relays.  Reset all alarms and indications on the relay. The 745 display should remain unchanged with no trip indications.  Slowly increase the frequency until the output relay(s) operate.  Check that the frequency at which operation took place is the selected frequency setting.  As the frequency is varied, verify that the A2 METERING  FREQUENCY  SYSTEM FREQUENCY actual value indicates the correct value of system frequency.  Slowly reduce the voltage.  Note the voltage at which the output relay(s) reset. Check that this dropout voltage is equal to the S4 ELEMENTS  FREQUENCY  OVERFREQUENCY  MINIMUM OPERATING VOLTAGE voltage level. Note that this level can be set down to 0.00 A, in which case the element remains operated to a voltage level of approximately 2% of nominal.  Slowly increase the voltage and check that the element operates when the voltage reaches 2% above the set level.  Return the voltage to nominal value.  Slowly decrease the current until the element resets.  Check that this dropout current level is equal to the S4 ELEMENTS  FREQUENCY  OVERFREQUENCY  MINIMUM OPERATING CURRENT setting.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation