RADISYS 61-0171-10控制器

产品详细资料
如果电压监控设置为0.0，则元件保持运行，直到电压降低到大约2%以下，即测量变得不可靠的水平。 缓慢增加电压，并检查当电压达到监督水平以上2%时元件是否工作。 将电压恢复到标称值。 缓慢降低电流，直到元件复位。检查此漏失电流水平是否等于S4元件 频率 低频率1 小工作电流设置：注意：如果元件中的电流感应被禁用，它将在电流降至0.0 A的情况下保持工作。 缓慢增加电流，并确保当电流达到刚好高于设定值的值时，元件工作。将电流设置为额定CT次级。 检查跳闸和拾取指示灯是否点亮，并显示以下跳闸信息之一：锁定：欠频1或操作：欠频2 缓慢增加频率，直到捡拾器LED和输出继电器复位。注意跌落水平，该水平应为拾音器加0.03 Hz。 检查跳闸指示灯是否仍亮。如果欠频率1目标设置为“锁定”，跳闸信息将保持亮起；如果设置为“自复位”，当频率高于设定值时，消息将复位。
If voltage supervision is set to 0.0, then the element remains operated until the voltage is decreased below approximately 2%, the level at which measurements become unreliable.  Slowly increase the voltage and check that the element operates when the voltage reaches 2% above the supervision level.  Return the voltage to nominal value.  Slowly decrease the current until the element resets.Check that this dropout current level is equal to the S4 ELEMENTS  FREQUENCY  UNDERFREQUENCY 1  MINIMUM OPERATING CURRENT setting: Note If current sensing is disabled in the element, it will remain operated with current reduced to 0.0 A.  Slowly increase the current and ensure the element operates when the current reaches a value just above the setting. Set the current to rated CT secondary.  Check that the Trip and Pickup LEDs are on and one of the following trip messages is displayed: LATCHED: Underfrequency 1 or OPERATED: Underfrequency 1  Slowly increase the frequency until the Pickup LED and output relays reset. Note the dropout level, which should be the pickup plus 0.03 Hz.  Check that the Trip LED is still on. The trip message will stay on if the UNDERFREQUENCY 1 TARGET setting is “Latched”; if set to “Self-resetting”, the message will reset when frequency is above the setpoint.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation