Radisys 61-0215-10工控DCS系统自动化设备

产品详细资料
 施加电流信号并测量操作时间。该时间应等于“通电时间”加上大约50毫秒。 禁用通电检测方案，并重复计时测试。操作时间应为谐波抑制差动元件的正常操作时间。7.5.2.12目标、输出、触点和显示操作 在上述百分比差分测试期间，验证所有目标、输出触点和显示消息的正确操作。7.5.2.13逻辑输入的闭锁每个元件可以编程为通过逻辑输入、虚拟输入、虚拟输出、输出继电器操作或自检继电器操作进行闭锁。此步骤验证差动元件是否可被逻辑输入1堵塞。 通过设置S4 ELEMENTS（S4元件）选择逻辑输入1 有差别的 差分百分比 差速块百分比设定值至Logc Inpt 1。 施加电流以操作差分元件，然后断言逻辑输入1。 验证元素是否已重置，并且所有目标都可以重置。 在逻辑输入1被断言的情况下，移除电流并重新施加。 验证元件是否未运行。瞬时差动保护7.5.3.1该元件的概述设置在S4元件下 INST DIFFERENTIAL设定点组。必须禁用所有其他保护元件，以确保跳闸继电器和辅助继电器由被测元件操作。根据FlexLogic的预期设置监控适当的触点™.
 Apply the current signal and measure the operating time. The time should be equal to ‘energization period’ plus approximately 50 ms.  Disable the energization detection scheme and repeat the timing test. The operate time should be the normal operating time of harmonic restraint differential element. 7.5.2.12 Target, Output, Contact, And Display Operation  Verify the correct operation of all targets, output contacts, and display messages during the percent differential tests above. 7.5.2.13 Blocking from Logic Inputs Each element can be programmed to be blocked by a logic input, virtual input, virtual output, output relay operation, or self-test relay operation. This procedure verifies that the differential element is blockable by logic input 1.  Select logic input 1 by setting the S4 ELEMENTS  DIFFERENTIAL  PERCENT DIFFERENTIAL  PERCENT DIFFERENTIAL BLOCK setpoint to Logc Inpt 1.  Apply current to operate the differential element then assert logic input 1.  Verify that the element has reset and that all targets can be reset.  With logic input 1 asserted, remove the current and reapply.  Verify that the element did not operate.Instantaneous Differential Protection 7.5.3.1 Overview Settings for this element are under the S4 ELEMENTS  INST DIFFERENTIAL setpoints group. All other protective elements must be disabled to ensure that trip relay(s) and auxiliary relays are operated by element under test. Monitor the appropriate contact per intended settings of the FlexLogic™.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation