RADISYS C2SBM-RSYS-PL2主板

产品详细资料
设定点输入为了存储任何设定点，端子D9和D10（接入端子）必须短路（钥匙开关可用于安全）。还有一个设置点密码功能，用于限制对设置点的访问。必须输入密码才能更改设定点值。密码“0”有效地关闭了密码功能——在这种情况下，更改设定点只需要接入跳线。如果5分钟内未按下任何键，则访问设定点值将受到限制，直到再次输入密码为止。为了防止在5分钟到期之前访问设置点，可以关闭并重新打开装置，可以拆除访问跳线，或者将setpoint access设置点更改为“Restricted”（受限）。在端子D9和D10（接入端子）短路之前，无法输入密码。当允许设置点访问时，745前面的设置点访问LED指示灯将点亮。即使在变压器运行时，设定值更改也会立即生效。但是，不建议在变压器运行时更改设定点，因为任何错误都可能导致跳闸。以下程序可用于访问和更改设定点。此特定示例是指如果密码为“745”，则输入有效的密码以允许访问设定点。1.按下MENU（菜单）键访问每个菜单的标题，该标题将按以下顺序显示：2。按下MENU（菜单）键，直到显示屏显示设定点菜单的标题，然后按下MESSAGE RIGHT（向右消息）或ENTER（输入）键，显示个设定点页面的标题。设定点页面是有编号的，有一个“S”前缀以便于识别，并且有一个名称可以大致了解该页面中可用的设置。按下MESSAGE（消息）键将滚动浏览所有可用的设置点页面标题。设定点页面标题
Setpoint Entry To store any setpoints, terminals D9 and D10 (access terminals) must be shorted (a keyswitch may be used for security). There is also a setpoint passcode feature that restricts access to setpoints. The passcode must be entered to allow the changing of setpoint values. A passcode of “0” effectively turns off the passcode feature - in this case only the access jumper is required for changing setpoints. If no key is pressed for 5 minutes, access to setpoint values will be restricted until the passcode is entered again. To prevent setpoint access before the 5 minutes expires, the unit may be turned off and back on, the access jumper may be removed, or the SETPOINT ACCESS setpoint may be changed to “Restricted”. The passcode cannot be entered until terminals D9 and D10 (access terminals) are shorted. When setpoint access is allowed, the Setpoint Access LED indicator on the front of the 745 will be lit. Setpoint changes take effect immediately, even when transformer is running. However, changing setpoints while the transformer is running is not recommended as any mistake may cause a nuisance trip. The following procedure may be used to access and alter setpoints. This specific example refers to entering a valid passcode to allow access to setpoints if the passcode was “745”. 1. Press the MENU key to access the header of each menu, which will be displayed in the following sequence: 2. Press the MENU key until the display shows the header of the setpoints menu, then press the MESSAGE RIGHT or ENTER key to display the header for the first setpoints page. The set point pages are numbered, have an 'S' prefix for easy identification and have a name which gives a general idea of the settings available in that page. Pressing the MESSAGE keys will scroll through all the available setpoint page headers. Setpoint page headers
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation