OKUMA E4809-045-122-C输入输出模块

产品详细资料
由于COMM总线未连接到HART接口模块，因此可能与HART接口模块共享机箱的机箱类型或模块类型没有限制。此外，对可以互连机箱的电缆类型没有限制。HART兼容机箱不提供带有机箱和插槽地址的接口模块，用于确定HART多路复用器（MUX）的RS-485端口地址。在这些机箱中，机箱和插槽地址由2071H HART MUX模块上的DIP开关设置，该模块是HART接口模块的可拆卸子组件。DIP开关在工厂设置正确，但如果需要更换MUX模块，用户可以设置DIP开关。HART MUX模块中有两个DIP开关；一个设置插槽地址，一个设置机箱地址。在电路板上，插槽地址DIP开关标记为“SW1”和“插槽地址”，机箱地址DIP交换机标记为“SW2”和“机箱地址”。每个DIP开关有四个编号为1到4的开关。开关的“ON”和“OFF”方向标记在开关本身和每个开关旁边的电路板上。显示了正确的插槽地址开关设置，第257页的表88显示了正确机箱地址开关设置。一旦DIP开关设置正确，RS-485端口地址将如中所示。•如果RS-485端口地址在网络上重复，则与HART控制器的通信将出现故障。确保设计带有HART接口模块的Tricon系统，该系统不会重复端口地址。请注意，机箱1到7的地址在机箱9到15中重复。
There are no restrictions on the type of chassis or the type of modules that may share a chassis with the HART Interface Modules because the COMM bus is not connected to the HART Interface Modules. Also, there are no restrictions on the type of cable that may interconnect chassis. The HART compatible chassis do not provide interface modules with the chassis and slot addresses for determining the RS-485 port address for the HART multiplexer (MUX). In these chassis, the chassis and slot addresses are set with DIP switches on the 2071H HART MUX Module, a removable sub-component of the HART Interface Module. The DIP switches are set correctly at the factory, but if a MUX Module needs to be replaced, the DIP switches can be set by the user.There are two DIP switches in the HART MUX Module; one sets the slot address and one sets the chassis address. On the circuit board, the slot address DIP switch is marked “SW1” and “SLOT ADDRESS” and the chassis address DIP switch is marked “SW2” and “CHASSIS ADDRESS.” Each DIP switch has four switches numbered 1 through 4. The “ON” and “OFF” directions for the switches are marked on the switch itself and on the circuit board next to each switch.shows the correct slot address switch settings and Table 88 on page 257 shows the correct chassis address switch settings. Once the DIP switches are set correctly, the RS-485 port address will be as indicated in • If RS-485 port addresses are duplicated on a network there will be failures in communication with the HART controller. Be sure to design a Tricon system with HART Interface Modules that does not duplicate port addresses. Note that the addresses for chassis 1 through 7 are repeated in chassis 9 through 15.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation