OKUMA E4809-045-112-C通讯模块

产品详细资料
当使用8121型增强型低密度扩展机箱时，HART多路复用器（MUX）的RS-485端口地址由扩展底盘的编号（见第238页底盘的I/O总线地址）和连接的HART接口模块所在的插槽编号决定。端口地址只能在0-63的范围内，Tricon系统多可以容纳70个HART接口模块，因此单个RS-485网络不可能在一个完整的Tricon系统中容纳所有的机箱。第253页的表86显示机箱1-7的地址在机箱9-15中重复。注意：为了确保RS-485端口地址正确自动分配，请确认插槽地址（SW1）和机箱地址（SW2）的所有DIP开关都设置在断开位置。这些DIP开关位于2071H HART MUX模块上，该模块是HART接口模块的可拆卸子组件。a。在包含8110型主底盘的Tricon v10.x或v11.x系统中，底盘1只能作为主底盘使用，没有接口模块的物理插槽。在从v6-v8升级的系统中，包含较旧的主机箱，主机箱具有用于接口模块的逻辑插槽和物理插槽，并且可以接受HART接口模块。b.底盘2可与HART接口模块一起使用，除非它包含通信模块。
When using the Model 8121 Enhanced Low-Density Expansion Chassis, the RS-485 port address of the HART multiplexer (MUX) is determined by the number of the Expansion Chassis (see I/O Bus Address of Chassis on page 238) and the slot number that the connected HART Interface Module is in.Port addresses may only be in the range of 0-63 and a Tricon system may accommodate a maximum of 70 HART interface modules, so it is not possible for a single RS-485 network to accommodate all of the chassis in a full Tricon system. Table 86 on page 253 shows that the addresses for chassis 1-7 are repeated in chassis 9-15. Note To ensure that RS-485 port addresses are correctly auto-assigned, confirm that all of the DIP switches for the Slot Address (SW1) and Chassis Address (SW2) are set to the OFF position. These DIP switches are located on the 2071H HART MUX Module, which is a removable sub-component of the HART Interface Module.a. In a Tricon v10.x or v11.x system that contains a Model 8110 Main Chassis, chassis 1 is available only as a Main Chassis with no physical slots for interface modules. In a system that has been upgraded from v6-v8 and contains an older Main Chassis, the Main Chassis does have logical slots with physical slots for interface modules and can accept HART Interface Modules. b. Chassis 2 may be used with HART Interface modules unless it contains communication modules.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation