OKUMA E4809-045-109-F数字量控制板卡

产品详细资料
如果I/O电缆（将终端面板连接到Tricon背板的电缆）在容纳Tricon机箱的机柜外部布线，则I/O电缆应在金属导管中布线。在8121型增强型低密度扩展机箱中安装HART接口模块为安装HART接口模块准备8121型加强型低密度扩充机箱，安装、供电和接地机箱，与安装任何其他Tricon机箱相同，如本章所述。使用9000型I/O总线扩展电缆连接机箱之间的I/O总线。此图显示了使用安装在8121型增强型低密度扩展底盘中的HART接口模块进行HART通信的示例。图89使用8121型增强型低密度扩展底盘的典型HART安装将接口电缆从终端面板连接到HART接口模块前部的ELCO连接器。注意：8101型低密度扩展机箱中的模拟输入接口模块使用了Amp连接器。为了在不修改现有布线的情况下，将8101型低密度扩展机箱更换为8121型增强型低密度扩充机箱，提供了适配器电缆（4000171-002）。警告9001型I/O COMM总线扩展电缆不能用于8121型低密度扩展机箱。HART接口模块使用通道C COMM总线进行RS-485通信，将其连接到机箱外部会干扰COMM总线和HART通信。
If the I/O cable (the cable that connects the termination panel to the Tricon backplane) is routed outside the cabinet that houses the Tricon chassis, the I/O cable should be routed in a metal conduit.Installing HART Interface Modules in the Model 8121 Enhanced LowDensity Expansion Chassis To prepare the Model 8121 Enhanced Low-Density Expansion Chassis for installation of HART interface modules, mount, power, and ground the chassis the same as you would for any other Tricon chassis, as described throughout this chapter. Use the Model 9000 I/O Bus Expansion Cable to connect the I/O bus between chassis. This figure shows an example of HART Communication using HART Interface Modules installed in the Model 8121 Enhanced Low-Density Expansion Chassis. Figure 89 Typical HART Installation Using Model 8121 Enhanced Low-Density Expansion Chassis Attach interface cables from termination panels to the ELCO connectors on the front of the HART Interface Modules. Note Analog Input Interface modules in Model 8101 Low-Density Expansion Chassis used an Amp connector. To allow for the replacement of Model 8101 Low-Density Expansion Chassis with Model 8121 Enhanced Low-Density Expansion Chassis with no modifications to existing wiring, an adapter cable (4000171-002) is available. WARNING The Model 9001 I/O COMM Bus Expansion Cable cannot be used in the Model 8121 Low-Density Expansion Chassis. HART Interface Modules use channel C COMM bus lines for RS-485 communication and connecting them outside the chassis will interfere with the COMM bus and HART communication.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation