OKUMA E4809-045-044工控控制卡件

产品详细资料
Tricon控制器可以在操作时进行维修。然而，只有操作员正确遵循维修程序，才能确保控制器的完整性。如果对程序有疑问，操作员应采取一切必要措施确保工厂和人员的安全，然后致电Invensys寻求执行维修程序的帮助。底盘的后部安装通常，一个或多个Tricon底盘后部安装在底板上，安装支架安装在底盘后部。然后将底板放入一个20英寸（51厘米）深的工业外壳中，该外壳符合NEMA 12型规范。Tricon机箱（主机箱或扩展机箱）要求底板或面板上的占地面积为19英寸宽乘22.75英寸高（48.3厘米宽乘57.8厘米高）。机架安装机箱通过在机箱前部安装安装支架，Tricon机箱可以机架安装在标准的19英寸（47.5厘米）EIA（电子工业协会）标准#RS-310-C机架上。当机柜中有多个Tricon机箱时，Invensys建议它们之间的电缆垂直间隙至少为1.75英寸（4.45厘米）。图80显示了Tricon底盘安装的尺寸和间隙。
The Tricon controller can be repaired while operating. However, the integrity of the controller can only be assured if the operator follows repair procedures correctly. If in doubt about the procedures, the operator should take whatever steps are necessary to ensure the safety of the plant and personnel, then call Invensys for assistance in implementing the repair procedures.Rear-Mounting the Chassis Commonly, one or more Tricon chassis are rear-mounted on a subplate with the mounting brackets installed at the rear of the chassis. The subplate is then put into a 20 inches (51 centimeters) deep industrial enclosure built to NEMA Type 12 specifications. A Tricon chassis (either the Main Chassis or an Expansion Chassis) requires a footprint of 19 inches wide by 22.75 inches high (48.3 centimeters wide by 57.8 centimeters high) on a subplate or panel. Rack-Mounting the Chassis A Tricon chassis can be rack-mounted on a standard 19 inches (47.5 centimeters) EIA (Electronics Industries Association) Standard #RS-310-C rack by installing the mounting brackets at the front of the chassis. When there is more than one Tricon chassis in an enclosure, Invensys recommends having at least 1.75 inches (4.45 centimeters) vertical clearance between them for cables. Figure 80 shows dimensions and clearances for Tricon chassis installation.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation