AMAT 0100-76124自动化控制模块

产品详细资料
老化因子限制老化因子值也是负载、环境温度和变压器额定值的函数。 向绕组1相a施加电流，以表示至少100%的变压器负载。 使用A2计量 生命损失 绝缘老化因子实际值，观察老化因子逐渐增加。 您可能希望增加模拟负载或模拟或编程的环境温度，以使其更快地增加。当老化因子达到S4元素时 绝缘老化 老化因子极限 老化因子限制拾取操作水平，元件应进行操作。 根据FlexLogic验证所有编程的继电器操作™ 设置。 验证所有目标和信息是否符合预期和编程设定。时间延迟可以用手表进行验证，因为延迟通常以分钟为单位设置。4寿命损失限制寿命损失限制元件的典型设置要求更改限制或临时更改变压器的初始寿命损失。建议通过编程设定元件阈值以上的初始寿命损失来验证该功能。该元件立即运行，因为它没有相关的时间延迟。7.5.20分接监测器故障当感测到的电阻比监测器电路的编程值大150%时，分接监测器的故障元件工作。 连接一个电阻来模拟分接开关的电阻，并增加该电阻，直到元件工作为止。 计算元件工作时的电阻为大分接头位置处电阻的150%。 根据编程值验证所有继电器、目标和消息是否正常工作。
Aging Factor Limit The Aging Factor value is also a function of load, ambient temperature, and transformer ratings.  Apply a current to Winding 1 Phase A to represent at least a 100% transformer load.  Use the A2 METERING  LOSS OF LIFE  INSULATION AGING FACTOR actual value to observe that the aging factor increases gradually.  You may want to increase the simulated load or the simulated or programmed ambient temperature to cause a faster increase. When the aging factor reaches the S4 ELEMENTS  INSULATION AGING  AGING FACTOR LIMIT  AGING FACTOR LIMIT PICKUP operating level, the element should operate.  Verify all programmed relay operations as per FlexLogic™ settings.  Verify that all the targets and messages are as expected and programmed. The time delay can be verified with a watch as the delay is normally set in minutes.4 Loss of Life Limit Typical settings for the loss-of-life limit element dictate that either the limit be changed or the initial transformer loss-of-life be changed temporarily. Verification of this function is recommended by programming an initial loss-of-life above the element threshold. The element operates instantly as it has no associated time delay. 7.5.20 Tap Monitor Failure The tap monitor failure element operates when the sensed resistance is 150% larger than the programmed values for the monitor circuit.  Connect a resistance to simulate the tap changer resistance and increase this resistance until the element operates.  Calculate that the resistance at which the element operated is 150% of the resistance that would be present at the maximum tap position.  Verify all relay, targets and messages for correct operation per programmed values.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation