CDB01.1C-ET-EN1-EN1-EN2-NNN-NNN-L2-S-NN-FW伺服驱动

产品详细资料
CDB01.1C-ET-EN1-EN1-EN2-NNNN-L2-S-NN-FW控制单元由Bosch Rexroth Indramat制造。该设备使用MultiEthernet作为其主要通信形式，并配备了各种接口选项，包括编码器HSF/RSF和编码器EnDat 2.1/1Vpp/TLL。如果该元件具有非常反时限的特性，则可以更容易、更准确地将电流增加到远高于拾取电平，直到跳闸继电器工作，然后将电流降低到略高于工作电平。然后，电流可以慢慢降低到低于操作水平，并观察跳闸继电器的复位动作。此电流的重置电平应约为拾取电平的98%。 一旦继电器断开，缓慢增加电流，直到跳闸触点闭合。操作水平应与拾取设置相对应。 检查是否显示以下消息之一：LATCHED a:W1 Phase Time OC或OPERATED a:W1相位时间OC该消息将指示LATCHED或OPERATED，具体取决于目标的设置。7.5.4.4操作时间使用如下所示的表格，选择三（3）个或四（4）个电流倍数值，以测量时间。
The CDB01.1C-ET-EN1-EN1-EN1-EN2-NNNN-L2-S-NN-FW control unit is manufactured by Bosch Rexroth Indramat. The device utilizes MultiEthernet as its main communication form and is equipped with various interface options, including encoder HSF/RSF and encoder EnDat 2.1/1Vpp/TLL.f the element has a very inverse time characteristic, it is easier and more accurate to increase the current far above the pickup level until the trip relay operates then reduce the current to just above the operate level. Then, current can be slowly reduced below the operate level and observed for a reset action on the trip relay. This reset level for the current should be approximately 98% of the pickup level.  Once the relay drops out, slowly increase the current until the trip contact closes. The operate level should correspond to the pickup setting.  Check that one of the following messages is displayed: LATCHED a: W1 Phase Time OC or OPERATED a: W1 Phase Time OC The message will indicate LATCHED or OPERATED, depending on the setting for the target. 7.5.4.4 Operating Time Using a table like the one shown below, select three (3) or four (4) values of current multiples at which the timing is to be measured.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation