欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
FLOWSERVE 619271-00数字量输入卡件

主页 > 产品中心 > RELIANCE

FLOWSERVE 619271-00数字量输入卡件

类目:RELIANCE
型号:FLOWSERVE 619271-00
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情

产品详细资料
在以太网接口重新启动、电源循环或下载或清除配置之前,通过网络分配的IP地址一直有效。连接后,应通过硬件配置数据将预期IP地址下载到以太网接口。4.2.2.4使用重置按钮分配临时IP地址ETM001 Kxxx以太网模块支持通过IP设置模式设置临时IP地址。此模式旨在临时指定ETM001-Kxxx的IP地址。在没有串行端口的RX3i系统的初始配置过程中,该实用程序为有用。要启用临时IP地址,请在CPU处于STOP模式时按住重置按钮至少五秒钟,进入模块上的IP设置模式。释放重置按钮后,以太网模块将进入IP设置模式,网络速度指示灯(10/100/1000)上会出现一个发光模式。在此模式下,前面板端口的配置将为:底部端口的配置为:IP设置模式超时15分钟。要退出IP设置模式,可以再次按下重置按钮,或者可以安全地拆卸和重新安装模块。如果在IP设置模式下进入运行模式,则IP设置模式将自动退出,并且在通信可用之前会有一秒的延迟。
The IP address assigned over the network remains in effect until the Ethernet interface is restarted, power-cycled or until the configuration is downloaded or cleared. Once connected, the intended IP address should be permanently downloaded to the Ethernet interface via the Hardware Configuration data. 4.2.2.4 Assigning a Temporary IP Address Using the Reset Button The ETM001-Kxxx Ethernet module supports setting a temporary IP address through an IP Setup Mode. This mode is designed to temporarily specify the IP address of the ETM001- Kxxx. The utility is most useful during the initial configuration of an RX3i system with no serial port.To enable the temporary IP address, begin by entering IP Setup Mode on the module by pressing and holding the reset button for at least five second while the CPU is in STOP mode. Upon release of the reset button, the Ethernet module will enter IP Setup Mode and a light pattern will appear on the network speed LEDs (10/100/1000). While in this mode, the front panel port’s configuration will be:The bottom ports’ configuration will be:IP Setup Mode has a timeout of 15 minutes. To exit IP Setup Mode, the reset button may be pressed again, or the module can be safely removed and reinstalled. If run mode is entered while in IP Setup Mode, the IP Setup mode will be automatically exited and a there will be a sub-second delay before communications are available.
主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能,还需了解产品的使用寿命环境。

●充分学习产品使用手册,否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation