FLOWSERVE 800-02-WO-1-1-T-01数字量输入卡件

产品详细资料
正确配置字段后，单击“设置IP”按钮。Set Temporary IP Address（设置临时IP地址）实用程序验证指定的IP地址是否尚未使用，然后将目标以太网接口设置为指定IP地址。后，该实用程序验证目标以太网接口是否在选定的IP地址做出响应。报告任何错误或成功完成。这些操作可能需要长达一分钟的时间注意由set temporary IP address实用程序设置的临时IP地址在电源循环期间不会保留。要设置IP地址，必须设置配置目标的IP地址，并将硬件配置下载到PACSystems目标。设置临时IP地址实用程序可以分配临时IP地址，即使目标以太网接口之前已配置为非默认IP地址。（这包括覆盖程序员先前配置的IP地址。）小心使用此IP地址分配机制。使用BOOTP分配临时IP地址10要使用BOOTP，使用BOOTP进行IP地址配置选项必须为TRUE，并且IP地址、子网掩码和网关IP地址必须设置为0.0.0.0。当PACSystems以太网接口从硬件配置或内部备份配置接收到默认IP地址（0.0.0.0）时，它会尝试从以太网上的BOOTP服务器获取临时IP地址，因为以太网接口充当BOOTP客户端。
When the fields are properly configured, click the Set IP button. The Set Temporary IP Address utility verifies that the specified IP address is not already in use, then it sets the target Ethernet interface to the specified IP address. Finally, the utility verifies that the target Ethernet interface responds at the selected IP address. Any error or successful completion is reported. These operations may take up to a minute CAUTION The temporary IP address set by the Set Temporary IP Address utility is not retained through a power cycle. To set a permanent IP Address, you must set configure the target's IP Address and download the Hardware Configuration to the PACSystems target. The Set Temporary IP Address utility can assign a temporary IP address even if the target Ethernet interface has previously been configured to a non-default IP address. (This includes overriding an IP address previously configured by the programmer.) Use this IP Address assignment mechanism with care.Assigning a Temporary IP Address Using BOOTP 10 To use BOOTP, the Use BootP for IP Address configuration option must be TRUE, and the IP Address, Subnet Mask and Gateway IP Address must be set to 0.0.0.0. When the PACSystems Ethernet interface receives the default IP address (0.0.0.0), either from Hardware Configuration or from internal backup configuration, it attempts to obtain a temporary IP address from a BOOTP server on the Ethernet network, since the Ethernet interface acts as a BOOTP client.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation