产品详细资料
RSTi EP CPE100/CPE115嵌入式以太网的默认IP地址与CPU的初始以太网通信可以使用工厂编程的默认IP IP地址建立:注意:IP子网192.168.180.XXX保留在CPE100/115上。它不可用于在CPU的任何以太网端口上进行配置。CPE100/115 LAN1 CPE100/115LAN2 7当将CPE400/410 Target属性配置为Enable Redundancy=True时,LAN3将在PME中显示为3 Redundancy,并为LAN 3=Redundancy的两个LAN3端口进行交换(灰色显示)。LAN3将不可配置。当IP地址未知时连接到CPE302/CPE305/CPE310嵌入式以太网如果CPE302/CPE305/CPE310嵌入式以太网接口的IP地址未知,可以使用以下方法之一建立通信以设置IP地址:•通过其串行端口连接到CPE302/CPE305/CPE310,并通过下载硬件配置为嵌入式以太网接口分配IP地址。•使用位于同一机架中的具有已知IP地址的IC695ETM001模块,通过PME连接到CPE302/CPE305/CPE310。下载具有嵌入式以太网接口所需IP地址的新硬件配置。
Default IP Addresses for RSTi-EP CPE100/CPE115 Embedded Ethernet Initial Ethernet communication with the CPU may be established using the default IP addresses programmed at the factory: Note: The IP subnet 192.168.180.XXX is reserved on the CPE100/115. It is not available for configuration on any of the CPU’s Ethernet ports. CPE100/115 LAN1 CPE100/115 LAN2 7 When the CPE400/410 Target property is configured for Enable Redundancy = True, LAN3 will display as 3 Redundancy in PME and Switched for both LAN3 port with LAN 3 = Redundancy (greyed out). LAN3 will not be available to configure.Connecting to CPE302/CPE305/ CPE310 Embedded Ethernet when IP Addresses are not known If the IP address of the CPE302/CPE305/CPE310 embedded Ethernet interface is not known, communication may be established using one of these methods to set a permanent IP address: • Connect to the CPE302/CPE305/CPE310 via its serial port and assign an IP Address to the embedded Ethernet interface by downloading a Hardware Configuration. • Connect to the CPE302/CPE305/CPE310 with PME using an IC695ETM001 module with a known IP address and located in the same rack. Download a new Hardware Configuration with the desired IP address for the embedded Ethernet interface.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。
主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
优势:供应进口原装正品,专业停产配件,
发货快,货期精准,
主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。
只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!
●使用前:
在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。
Read and strictly follow safety-related information before operatingmaintainingand installing equipment.
●使用者要求:
必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。
Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:
应用于品牌本系列工业以及生产生活自动化设备产品。
Used in the brand of this series of industriaand production automation eauipment products
适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。
Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.
●操作人员:
应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:
熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。
Equipment should be installed,operated and maintained by trained operators from the brand
●危险情况
警告
.请注意使用人员的人身安全。
●除了产品特性以及功能,还需了解产品的使用寿命环境。
●充分学习产品使用手册,否则非专业人员可能会造成人身危险。
Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.
●服务行业
适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业
Applicable to cementwood,stone,rubber,petroleumchemical, power generation