欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
FLOWSERVE A2R13903-01轴承伺服控制器

主页 > 产品中心 > RELIANCE

FLOWSERVE A2R13903-01轴承伺服控制器

类目:RELIANCE
型号:FLOWSERVE A2R13903-01
全国服务热线:+86 15270269218
手机:+86 15270269218
微信:+86 15270269218
QQ:3136378118
Email:stodcdcs@gmail.com

在线咨询
产品详情

产品详细资料
如果以太网接口使用重置按钮设置固定的临时IP地址,请按住重置按钮五秒钟以上。进入IP设置模式将在前面板的交通速度指示灯上显示一个灯模式。按钮控制的重新启动操作如下所示,每个操作都有LED指示:重新启动操作ETM001 Jx-按住重新启动功能ETM001 Kxxx-按住重置功能正常重新启动以太网接口,并启动正在使用的任何可选以太网插件应用程序。少于五秒钟少于五秒钟在不启动任何以太网插件应用程序的情况下重新启动以太网接口。5到10秒N/A进入IP设置模式以设置初始IP地址。N/A五秒钟以上重新启动以太网接口以进行固件更新操作。重新启动后10秒以上,通电时按住重置按钮当强制进入固件更新操作时,但在固件更新开始之前,再次按下以太网重新启动/重置按钮以退出固件更新模式,并使用现有固件重新启动。固件更新开始后,现有固件将被擦除,以太网重新启动/重置按钮将被禁用,直到固件更新完成。如果错误地进入固件更新模式,只需从背板上卸下并更换以太网模块即可。
If the Ethernet interface uses the reset button to set a fixed temporary IP address, press and hold the reset button for more than five seconds. Entering the IP Setup Mode will display a light pattern on the front panel’s traffic speed LEDs. Pushbutton-controlled restart operations are listed below, with the LED indications for each: Restart Operation ETM001-Jx – Press and Hold Restart Functionality ETM001-Kxxx - Press and Hold Reset Functionality Restart the Ethernet interface normally, and start any optional Ethernet plug-in applications that are being used. Less than five seconds Less than five seconds Restart the Ethernet interface without starting any Ethernet plug-in applications. Five to 10 seconds N/A Put into IP Setup Mode to set initial IP address. N/A More than five seconds Restart the Ethernet interface into firmware update operation. More than 10 seconds After restart, press and hold reset button on power up When forced into firmware update operation, but before the firmware update begins, press the Ethernet Restart/Reset pushbutton again to exit the firmware update mode and restart with the existing firmware. Once the firmware update begins, the existing firmware is erased and the Ethernet Restart/Reset pushbutton is disabled until the firmware update is complete. If the firmware update mode was entered mistakenly, simply remove and replace the Ethernet module from the backplane.
主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能,还需了解产品的使用寿命环境。

●充分学习产品使用手册,否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation