520MD+37-W1D200-000阀门定位器

产品详细资料
在正常操作期间，当没有记录任何事件时，LOG EMPTY（记录空）指示灯亮起。在其他状态下，LOG EMPTY LED熄灭或闪烁，有助于定义模块的操作状态。有关LED行为的更多信息，请参阅2节：诊断。3.1.4.3以太网OK LED操作以太网OK LED指示模块是否可以执行正常操作。此指示灯在正常操作时亮起，在所有其他操作时闪烁。当硬件或不可恢复的运行时故障发生时，ETM001 Jx将闪烁一个识别故障的两位错误代码。ETM001 Kxxx将闪烁一个四位代码。有关故障排除的帮助，请参阅2.4节“硬件故障的以太网正常/正常LED闪烁代码”（ETM001 Jx）。如需有关ETM001 Kxxx故障排除的帮助，请致电技术支持。以太网端口LED操作（100Mb和链路/活动）以太网模块的正面配有LED，用于指示网络端口的物理连接和网络通信速度。两个以太网端口（1A和1B）和两个LED指示灯（“100”和“Link”）位于接口模块的前部。100–LED指示网络数据速度（10或100 Mbps）。当LED状态为ON时，该网络端口的网络连接为100Mbps。链路–LED指示网络链路状态和活动。当LED状态为ON时，链路处于物理连接状态。当LED闪烁时，在该网络端口检测到流量。（端口的流量并不表示以太网接口上存在流量。流量可能在交换机的端口之间引入。）
The LOG EMPTY LED is on during normal operation when no events are logged. In the other states, the LOG EMPTY LED is either off or blinking and helps define the operational state of the module. For more information on LED behavior, refer to Section 12: Diagnostics. 3.1.4.3 Ethernet OK LED Operation The Ethernet OK LED indicates whether the module can perform normal operation. This LED is on for normal operation and flashing for all other operations. When a hardware or unrecoverable runtime failure occurs, the ETM001-Jx will blink a two-digit error code identifying the failure. The ETM001-Kxxx will blink a four-digit code. For assistance troubleshooting errors , check Section 12.4, ETHERNET OK/OK LED Blink Codes for Hardware Failures (ETM001-Jx). For assistance troubleshooting ETM001-Kxxx, please call Technical Support.Ethernet Port LEDs Operation (100Mb and Link/Activity) The face of the Ethernet module is equipped with LEDs to indicate a physical connection at the network port and network traffic speed.Two Ethernet ports (1A and 1B) with two LED indicators (“100” and “LINK”) are located at the front of the interface module. 100 – LED indicates the network data speed (10 or 100 Mbps). When the LED state is ON, the network connection at that network port is 100 Mbps. Link – LED indicates network link status and activity. When the LED state is ON, the link is physically connected. When the LED blinks, traffic is detected at that network port. (Traffic at the port does not indicate traffic is present at the Ethernet interface. Traffic may be introduced between ports of the switch.)
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation