A-B 81001-340-71-R数字量控制板卡

产品详细资料
注意：SRTP非活动超时仅适用于通过SRTP的编程器连接。它不会影响HMI或SRTP通道。1.4以太网冗余操作冗余IP功能允许将单个IP地址分配给两个以太网模块，其中两个模块位于配置为冗余系统的两个不同PLC中。该功能已集成到产品线中，如下所示：CPL410所有固件版本不支持CPE400嵌入式以太网需要CPU固件版本9.30不支持除了每个接口的正常（直接）IP地址外，还配置了冗余IP地址。在任何时候，共享冗余IP地址的两个以太网接口中只有一个可以使用冗余IP地址；这是“活动”单元。当其PLC CPU发出命令时，该以太网接口激活冗余IP地址，并开始响应冗余IP地址及其直接IP地址。活动单元继续响应冗余IP地址，直到被命令停用冗余IP，或者直到以太网接口确定其已失去与PLC CPU的通信。
Note: The SRTP inactivity timeout applies only to programmer connections over SRTP. It does not affect HMI or SRTP channels. 1.4 Ethernet Redundancy Operation The Redundant IP feature allows a single IP address to be assigned to two Ethernet modules, where the two modules are in two different PLCs configured as a redundant system. This functionality has been integrated into the product line, as follows:CPL410 All firmware versions Not supported CPE400 Embedded Ethernet requires CPU Firmware Version 9.30 Not supported The Redundant IP Address is configured in addition to the normal unique (direct) IP address of each interface. Only one of the two Ethernet interfaces that share the Redundant IP address may use the Redundant IP address at any time; this is the “active” unit. When commanded by its PLC CPU, this Ethernet interface activates the Redundant IP address and starts responding to the Redundant IP address in addition to its direct IP address. The active unit continues responding to the Redundant IP address until it is commanded to deactivate the Redundant IP or until the Ethernet interface determines that it has lost communications with the PLC CPU.
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation